Skip to content
Wow Interior
Wow Interior
WhatsApp usCall

Vectra

Vectra PU Matte Panels

Thirty-four articles on a polymer matte surface over an HDHMR base. These are not tiles — they are full-height boards up to 9.5 ft, so a wall goes up in a handful of pieces with almost no joints. Twelve shades run across the range, and the same article can be ordered in a different shade to order.

34 codes · 1 collection

Deep blue chevron-relief Vectra panel wall behind a low bed
Base
HDHMR
Surface
Matte finish with polymer surface
Thickness
6 mm
Sizes
8 x 2 ft · 9.5 x 2 ft · 8 x 4 ft · 9.5 x 4 ft
Dimensions
2400 x 600 mm approx · 2900 x 600 mm approx
Use
Interior, vertical surfaces only

What it does well

  • Full-height boards — a 9 ft wall goes up with no horizontal joint.
  • HDHMR base takes screws and hinges, so the same board can face a wardrobe shutter.
  • Matte polymer surface: no glare under downlights, and it does not yellow like a gloss.
  • Metallic inlays are set into the board, not stuck on top.
  • Twelve stock shades, and the range is cut to size at the showroom.

Where people use it

  • Full-height feature walls
  • Bed backs and headboard walls
  • Wardrobe and cupboard shutters
  • Door faces
  • Office cabins and reception
  • Ceiling panelling

Stock shades

  • Black Stone
  • Ivory
  • Vogue Grey
  • Slate Grey
  • Blue
  • White
  • Satvario
  • Turquoise
  • Black
  • Brown Teak
  • Prisa
  • Army Green

Every code in the book

Showing 34 of 34

Finish

Vectra articles

2400 x 600 mm / 2900 x 600 mm approx · Sold per board

All thirty-four articles from the Vectra PU matte book, in the shade each is shown in.

The colour chart

The full shade range, straight from the supplier's book. Any article can be ordered in any of these — tell us the article number and the shade.

Colours here are for reference only. The actual shade varies slightly; check the physical chart at the showroom.

Vectra twelve-shade colour chart

Installed

Supplier reference installations from the catalogue — click any image to see it full size.

Fitting it

  1. Interior and vertical use only. Horizontal use and humid rooms are limited by the supplier.
  2. Fix on a levelled ply or batten frame, or direct onto a true wall with adhesive.
  3. Cut on a panel saw with a fine blade, face up.
  4. Seal cut edges before fixing where the edge will be visible.
  5. Shade may vary slightly between batches — order a full wall from one batch.

Looking after it

  • Wipe with a damp cloth and a mild detergent.
  • Do not use abrasive pads on the matte surface.
  • Keep standing water off the base of the board.
Ask about installation

Questions we get asked

  • The supplier limits it to interior vertical use, with humid environments restricted. It is fine for a dry kitchen wall away from the hob and sink; it is not a shower material.