8401
Cascade Frame White
White
3D Panels
3D Wall Panels
Twenty-one moulded profiles, each offered in the same four finishes — White, Champagne Gold, Metallic Coffee and Dark Wooden — so you can run one pattern through a whole flat and change only the tone. Panels are 50 x 50 cm, glued straight onto a flat wall, and the mirror faces are moulded in, not applied.
55 codes · 21 collections
- Material
- Moulded PVC
- Panel size
- 50 x 50 cm (Brick Relief: 96 x 46 cm)
- Coverage
- 0.25 m² per panel
- Finishes
- White · Champagne Gold · Metallic Coffee · Dark Wooden
- Fixing
- Adhesive, direct to a flat wall
- Pack
- 30 – 150 pcs per box, by profile
What it does well
- Mirror facets are moulded into the panel, so they cannot peel off.
- Same 50 x 50 cm module across twenty of the twenty-one profiles — patterns can be mixed on one wall.
- Light enough to go over plaster, ply or an existing painted wall.
- Cuts with a fine-tooth blade; internal corners can be mitred.
- Washable — a damp cloth is enough.
Where people use it
- Living room feature wall
- TV and console backdrop
- Headboard wall
- Reception and lobby
- Restaurant and salon interiors
- Room dividers
Every code in the book
Showing 55 of 55
Collection
Finish
Cascade Frame
50 x 50 cm · 50 pcs per box
Stepped square frames with a mirror-finish centre — the deepest relief in the range.
Maze Line
50 x 50 cm · 50 pcs per box
Concentric ruled grooves broken by a single mirrored bar. Reads as a graphic line drawing across a full wall.
Petal Arc
50 x 50 cm · 50 pcs per box
Four soft quarter-domes per tile. Light rolls across the curve, so the wall changes through the day.
Origami Triangle
50 x 50 cm · 50 pcs per box
Folded triangles with a mirrored half — a sharp, faceted grid.
Lunar Disc
50 x 50 cm · 30 pcs per box
Scattered circular discs at three depths, mirror-faced. Best as a full feature wall.
Arch Niche
50 x 50 cm · 50 pcs per box
A recessed arch inside every tile, mirrored at the back. Reads like a row of tiny alcoves.
Prism Fold
50 x 50 cm · 60 pcs per box
Four folded prisms per tile, cut on the diagonal. Very high relief.
Deco Frame
50 x 50 cm · 50 pcs per box
Layered picture-frame moulding around a mirrored square — the most classical profile in the range.
Split Diagonal
50 x 50 cm · 50 pcs per box
Fine combed lines on one half, mirror on the other, split corner to corner.
Vortex Square
50 x 50 cm · 50 pcs per box
Concentric square grooves spiralling to a small mirrored centre.
Fluted Rib
50 x 50 cm · 50 pcs per box
Straight half-round flutes, edge to edge. The quietest panel here — closest to a real fluted timber wall.
Dune Wave
50 x 50 cm · 40 pcs per box
Vertical waves that run continuously tile to tile. No visible joint once installed.
Diamond Facet
50 x 50 cm · 100 pcs per box
Sharp four-sided pyramids. Throws the strongest shadow of any panel in the book.
Soft Diagonal
50 x 50 cm · 50 pcs per box
Fine diagonal combing split across the tile. Subtle at a distance, textural up close.
Hex Ribbon
50 x 50 cm · 40 pcs per box
Ribbed hexagons with a mirrored fold. Works as a room divider as well as a wall.
Ribbed Gem
50 x 50 cm · 40 pcs per box
Fine ribbing wrapped around a large mirrored gem facet.
Ribbed Gem — Bronze
50 x 50 cm · 80 pcs per box
The Ribbed Gem profile in an oxidised bronze-rust finish.
Half Triangle
50 x 50 cm · 50 pcs per box
Combed timber grain on one triangle, mirror on the other. The best-selling profile in the book.
Stripe Triangle
50 x 50 cm · 50 pcs per box
Tight pinstripe combing against a flat mirrored triangle.
Leaf Curve
50 x 50 cm · 40 pcs per box
Concentric arcs closing on a mirrored leaf shape.
Brick Relief
96 x 46 cm · 150 pcs per box
Moulded brick courses in a larger 96 x 46 cm sheet. Sold as an exposed-brick wall without the weight.
Installed
Supplier reference installations from the catalogue — click any image to see it full size.
Fitting it
- Wall must be flat, dry and free of loose paint. Skim any hollows first.
- Set out from the centre of the wall so cut panels land at both ends.
- Bead adhesive around the back edge and across the diagonal; press and hold.
- Butt panels tight — the moulded edge hides the joint.
- Finish external corners with a matching trim or a mitred cut.
Looking after it
- Dust with a dry microfibre cloth.
- Marks lift with a damp cloth and mild soap.
- Avoid solvent cleaners on the mirror facets.
Questions we get asked
On dry walls, yes. Keep them out of the shower enclosure and off any surface that stays wet.